manualshive.com logo in svg

Vicon KOL-3000, Operation Manual, Page: 47 / 103

Share
Download
Vicon KOL-3000 Operation Manual Download Page 47

Kollector Setup 

 

 

 

 Selecting Recording Cameras 

Not all installed cameras can record images. Only the selected cameras can 
record images. 
 
Example: When all 16 cameras are connected to a Kollector system and only 
recordings on cameras numbered 1, 4, 8, 12 are desired, click the camera 
numbers, 1, 4, 8, and 12.  Selected camera numbers will appear pressed to 
indicate the selection.  Click again to release the selection. 

 

*Note 
The number of installed cameras that are either not connected to the system or 
unpowered are shown dimmed on Select Recording Camera on the Recording  
menu and may not be selected until the camera is properly connected and/or 
powered.   

 

 Automatic Alternation Mode (automatic video switching) 

Turn on the checkmark on the 

Select Automatic Alternation

 Mode Time and 

select the Alternation time by sliding the selection bar. 
 
Automatic alternation mode displays images from each camera in rotation 
according to the selected options on the current recording screen. 

Summary of Contents for KOL-3000








































































































Reviews:

No comments