Final assembly
50
2. Aligning the side
devices in the work
position
The side devices are then aligned in the work position via the swivel
head of the hydraulic cylinder:
Use the tractor's hydraulic control unit to bring the implement into
the work position.
Drive forward a few metres until the running wheels are correctly
aligned.
Use the hydraulic control device to relieve the load on the hydraulic
cylinders.
Switch off the tractor and secure it.
Check if all frame parts are in a straight line.
Position
Solution
Correct work position
Reduce the stroke of the hydraulic
cylinder on the right-hand side
device.
Undo the lock nut.
Turn in the stroke adjuster on
the hydraulic cylinder.
Tighten the lock nut.
Increase the stroke of the
hydraulic cylinder on the right-
hand side device.
Undo the lock nut.
Turn out the stroke adjuster on
the hydraulic cylinder.
Tighten the lock nut.
Reduce the stroke of the hydraulic
cylinder on the left-hand side
device.
Undo the lock nut.
Turn in the stroke adjuster on
the hydraulic cylinder.
Tighten the lock nut.
Increase the stroke of the
hydraulic cylinder on the left-hand
side device.
Undo the lock nut.
Turn out the stroke adjuster on
the hydraulic cylinder.
Tighten the lock nut.
Stroke adjuster on
the hydraulic
Stroke adjuster on
the hydraulic
