Pallet packaging
52
Pallet assembly
Use suitable lifting accessories to lift the frame elements.
Loosen all fastenings (wires, lashing straps).
Follow the handling instructions below.
Fitting the main
frame
Screw both parts of the main frame together at the flange piece.
Please note: First guide the inside hydraulic and electrical lines
through the openings in the flange pieces of the two main frames.
Raise the rear main frame with lifting accessories and secure
under the flange piece with stand.
Raise the front main frame with lifting accessories and secure.
The long lighting cable is preassembled on the rear main frame.
Using the assembly cable, pull the long lighting cable through the
front main frame.
Remove the hydraulic line ball valves.
Pull the hydraulic lines from the rear through the front main frame.
Fit the hydraulic line ball valves.
Summary of Contents for Andex 844
Page 4: ...Table of contents 4 ...
