Crate packaging
47
Fitting the deflector
carrier
Fit the deflector carrier onto the bearing housing. Insert the bolts
from the outside to the inside and connect with the washer and self-
locking nuts.
Fit the flexible shaft to the gear box and secure with a dowel pin.
Fit the retainer plate onto the deflector carrier.
Fitting the crank
Place the crank on each rotor onto the flexible shaft and secure
using dowel pins.
Fit the crank locking device to the support on the deflector carrier.
Flexible shaft
Left gear box
Retainer plate
Deflector carrier
Bearing housing
Crank locking
device
Crank
No.
Quantity
Part
1
2
Cranks
2
2
Crank locking device
3
4
6 x 24 dowel pins
4
2
6 x 40 dowel pins
Summary of Contents for Andex 844
Page 4: ...Table of contents 4 ...
