Maintenance
81
Lubrication points
for grease
Working with a
grease gun
Before applying the grease gun
clean lubricating nipples and
grease gun attachment fitting.
Lubricate the bearings with one or two presses of the grease gun. If
you feel resistance at the second press, do not press a second time.
Too much grease will force the bearings apart. Dust and dirt can
penetrate into the bearings. This leads to premature wear.
Lubricate the places listed in the illustration as follows:
•
after 50 hours of operation.
•
before and after the season.
•
each time after cleaning with a high-pressure cleaner.
2 on each axle
carrier
Tandem axle
Drawbar and
support arm
All tine arms
2 single joints on the
main frame
3 on each gear box
Summary of Contents for Andex 714 T Vario
Page 4: ...Table of contents 4 ...