Parking and storage
73
Uncoupling the
machine
To uncouple the machine from the tractor, proceed as follows:
Set the machine down on a firm, level surface and lower it to the
work position.
Secure the tractor against rolling away, turn off the engine and
remove the ignition key.
Secure the machine against rolling away by using chocks.
Pull off the PTO shaft and place it on the holder provided.
Close the ball valve and release the hydraulic couplings.
Place hydraulic couplings in storage pockets.
Remove the tine supports.
Disconnect the lighting connectors and pilotbox and place them in
the storage pockets.
Store the pilotbox in a safe and dry place.
When using a lift link drawbar:
Lower the parking stand and secure with pins.
Lower the lower link until the parking stand rests safely on the
ground.
When using a pending attachment:
Fasten the height-adjustable parking stand [+] to the drawbar,
secure it, and relieve the drawbar with the parking stand.
Wind the electrical cables onto the hook.
Unhitch the machine.
Storage pockets
PTO shaft holder
Height-adjustable
parking stand [+]
PTO shaft holder
Summary of Contents for Andex 714 T Vario
Page 4: ...Table of contents 4 ...
