Vicom Systems FC-FC3, Installation And User Manual, Page: 85 / 102

71
A
PPENDIX
B
S
ERVICE AND
D
IAGNOSTIC
C
ODES
Table B-1 lists service codes the Status LED blinks when the Fault LED is Solid On.
View these codes by reading the SV Routers LEDs. If you do not find a matching service code
in the following table, contact Vicom for corrective action.
.
Code Number Cause Corrective Action
005 PCI Bus parity error. Replace router
024 The attempt to report one error
resulted in another error. Cycle power to the router. If
problem persists, contact Vicom.
040 Corrupt database. • Clear SAN Database.
• Cycle power to the router.
• Import SAN zone configuration
041 Corrupt database. • Clear SAN Database.
• Cycle power to the router.
• Import SAN zone configuration
042 Zone mapping database
corruption. Import SAN zone configuration
050 This message indicates that an
attempt to write a value into non-
volatile storage failed. It could be
a hardware failure, or it could be
that one of the databases stored
in Flash memory could not accept
the entry being added. • Clear SAN database
• Reboot SV Router
• If this fails contact Vicom.
Table B-1
Service Codes