Vicom Systems FC-FC3, Installation And User Manual, Page: 53 / 102

User Service Utility Interface
39
Figure 3-5
View/Change Response to SV Router FC-FC 3 Management Programs Command
Response
The current configuration is shown when you first enter the menu, and it can be viewed at any
time by typing
V
.
•
E/D
: Toggling between these enables (
E
) or disables (
D
) management software access.
If this is disabled, the SVE Daemon will be unable to communicate with the SV
Router FC-FC 3, and the only communication possible is with the User Service Utility
(serial port or Ethernet).
• If enabled, all hosts can access the SV Router FC-FC 3, unless restricted.
• If disabled, no hosts can access the SV Router FC-FC 3.
Note: Never disable management software access while the SV Router FC-FC 3 is handling system I/
O.
•
1/2
: Items
1
and
2
allow you to restrict in-band access to the SV Router FC-FC 3. The
default is unassigned, which allows the SV Router FC-FC 3 to talk to any host to which it
is connected. You can allow all hosts, one host, or two hosts.