Vibration Research VR10500, Hardware Manual

Page: 11 / 32

7 support@vibrationresearch.com
Site Requirements
The VR10500 can be mounted on a standard equipment rack or placed on a
tabletop.
Before installing the VR10500, verify that the site selected for the device meets
the following site requirements:
·
Power — The VR10500 is installed within 5ft (1.5m) of a grounded and easily
accessible outlet 220/110VAC, 50/60Hz.
·
General — The power source is correctly installed.
·
Clearance — There is adequate frontal clearance for operator access. Allow
clearance for cabling, power connections, and ventilation.
·
Cabling — Cabling is routed to avoid sources of electrical noise such as radio
transmitters, broadcast amplifiers, power lines, and fluorescent lighting
fixtures.
·
Ambient Requirements — The ambient VR10500 operating temperature range
is 36° to 122°F (2° to 50°C) at a relative humidity of up to 95%RH, non-
condensing. Verify that water or moisture cannot enter the VR10500 case.
·
Do not operate this product near volatile or flammable materials.
Physical Dimensions
Height — 1.75in (44.5mm) (1U)
Width — 17in (432mm) (19in rack mount with included brackets)
Depth — 11in (280mm)
Weight — 9.25lbs (4.2kg)