Vibe SA-k Series, Instruction Manual

Page: 6 / 8

For Surface Mount Component Fitment
● Follow steps 1 and 2 as detailed before in coaxial fitment for the positioning of the woofer.
●
Locate a suitable position for the in line crossover unit, this should not interfere with moving parts.
● Locate a suitable position for the tweeter. Many positions will provide good sound quality. For
optimum staging, position tweeter higher than woofer but within 5” to 10" of the woofer.
●
For suface mount fitment use the hole cut out template as specified for the tweeter on the cut out
template. Check that when the tweeter is in place it will not obstruct or interfere with any handles
or moving parts.
● Carefully cut out hole.
●
Following instructions below, mount tweeter in surface mount pod and push into place. Position
tweeter in flush pod and push into place making sure that the wires are behind the tweeter.
● Connect wires from the crossover unit marked HF to the tweeter. Making sure to connect to the
correct polarity.
● Connect wires from the crossover unit marked LF to the woofer. Making sure to connect to the
correct polarity.
●
Connect input wire to music source i.e. head unit or amplifier. Make sure that the source is turned
off before making this connection to avoid damage to the equipment.