For Flush Mount Component Fitment
●
Follow steps 1 and 2 as detailed before in coaxial fitment for the positioning of the woofer.
●
Locate a suitable position for the in line crossover unit. This should not interfere with any moving parts.
●
Locate a suitable position for the tweeter. Many positions will provide good sound quality. For optimum
staging, position tweeter higher than woofer but within 5” to 10" of the woofer.
●
∑
For flush mount fitment use the hole cut out template as specified for the tweeter on the cut out
template. Check that when the tweeter is in place it will not obstruct or interfere with any handles or
moving parts.
●
Carefully cut out hole.
●
Following instructions below, mount tweeter in flush mount pod and push into place.
●
Connect wires from the crossover unit marked HF to the tweeter. Making sure to connect to the
correct polarity
●
Connect wires from the crossover unit marked LF to the woofer. Making sure to connect to the
correct polarity
●
Run and connect input wire to music source i.e. head unit or amplifier. Make sure that the source is
turned off before making this connection to avoid damage to the equipment.
Summary of Contents for SA-k Series
Page 7: ...Specifications ...
