CAUTION
Never connect any speaker lead to the car chassis. This can cause severe damage to your
speaker /car radio /amplifier.
Before drilling or cutting any holes, investigate the layout of your vehicle thoroughly.
Use caution when working near the hydraulic lines and electrical wiring.
Observe the correct polarity when wiring, improper phasing may cause a loss of bass
response.
Ensure that no moving parts catch on the speaker or grill (e.g. window or door handles, or
window glass inside the door)
Installation
The quality of the installation will affect the system performance and reliability.
Contact your nearest authorised VIBE dealer if you are unsure on the installation of this
product.
Please be sure to mount this unit away from anty potential hazards.
Minimising the length of wires will provide higher audio output from the system.
The speaker should be securely fastened to the mounting position using the screws
provided.
Predrill your mounting holes using a drill and position with the template provided.
Be sure to investigate your mounting area thoroughly for electrical wires, vacuum lines,
brake or fuel lines or fuel tank to prevent causing any damage.
Firstly make sure that the speakers will fit in your chosen location. This may involve the
removal of the standard vehicle speakers. Please use the mounting depth and hole cut
dimensions as detailed in this manual for guidance.
Decide whether the SA-k Speaker is to be used as a component set (separate woofer and
tweeter) or a coaxial (combined as one unit).
Summary of Contents for SA-k Series
Page 7: ...Specifications ...
