Vibe SA-k Series, Instruction Manual

Page: 4 / 8

For Coaxial Fitment
● Cut if necessary any material to allow the correct seating of the speaker, using the hole cut out
template enclosed.
●
If using grill ensure the plastic ring is seated behind the speaker at this point.
● Connect wires from the crossover unit marked HF to the tweeter. Making sure to connect to the
correct polarity
● Connect wires from the crossover unit marked LF to the woofer. Making sure to connect to the
correct polarity
●
Predill your mounting holes using a drill and position with the template provided.
● Securely screw the speaker in place using the screws provided. Ensure that no wires are trapped.
●
Place 4 of the supplied adhesive pads around the grill edge .
● Finally push grill carefully into place.