Viavi SmartClass OLP-85 Series Operating Manual Download Page 9

Page: 9 / 84

OLP-85/OLP-85P

YMBOLS

USED

THIS

OPERATING

MANUAL

1 I

NTRODUCTION

The following elements are used in this operating manual:

Requirement

This requirement must be met first; e.g.

The system is switched on.

Instruction

Follow the instructions given (the numbers indicate the order

in which the instructions should be followed); e.g.

Select mode.

Italics

Result

Indicates the result of following an instruction; e.g.

The page opens.

Boldface

Pages, controls, and display elements

Screen pages, controls, and display elements are indicated in

boldface.

Text in

blue

Cross references

Cross references are indicated in blue type. When using the

PDF version, just click on the blue text to skip to the cross

reference.

[

]

Instrument keys

Instrument keys are indicated within square brackets.

[

]

Touchscreen buttons

Touchscreen buttons are indicated within square brackets.

Summary of Contents for SmartClass OLP-85 Series





















































































Search results

Summary of Contents for SmartClass OLP-85 Series

Reviews:

Viavi SmartClass OLP-85 Series, Operating Manual, Page: 9 / 84

Search results

Summary of Contents for SmartClass OLP-85 Series

Reviews: