MAP-200 Optical Switch mOSW-C1 Installation and User Guide
Page 42
June 2016
Document Number: 22112369-120 R000
Status: Standard
Chapter 7:
Updating the
Firmware
Updating the MAP-200 Firmware
Follow this procedure to update the firmware on the MAP-200 Chassis. Note that the
MAP-200 firmware update may also contain a new mOSW-C1 firmware image which
must be upgraded separately. After updating the MAP-200 chassis, please refer to
the procedure described in the “Updating the mOSW-C1 Firmware” section.
1. Download the latest firmware for the MAP-200 to your PC. The firmware is
available on the MAP-200 resource page at
http://www.viavisolutions.com/en-
2. Insert a formatted USB memory stick into your PC. It is recommended to
have the memory stick formatted with FAT format.
3. Copy the .zip file that you downloaded from the web and save it on the USB
memory stick.
4. Extract the content of the .zip file to the root directory of your USB memory
stick.
NOTE:
The MAP-200 controller expects the folder “MAP-200” to be on
the root drive of the USB memory stick.
5. Remove the USB memory stick using the appropriate procedure for your PC.
6. Plug your USB memory stick into your MAP-200 platform.
7. Navigate to the settings screen.
8. In the setting screen select the upgrade tab.
9. Press the upgrade button.
The firmware upgrade will then take place and will take about 25 minutes.
The upgrade may take longer if upgrading from an older version of MAP-200
