10 | © 2020 Viavi Solutions (3 Feb 2020) — viavidoc.com/observerstart
Figure 6: Installing the inner rails
6.
Identify the outer rack rails.
7.
Press upward on the locking tab at the rear end of the middle rail.
8.
Push the middle rail back into the outer rail.
9.
Hang the hooks on the front of the outer rail onto the square holes on the front of the rack.
If desired, use screws (and washers) to secure the outer rails to the rack.
10.
Pull out the rear of the outer rail, adjusting the length until it just fits within the posts of
the rack.
Figure 7: Extending and mounting outer rails
11.
Hang the hooks of the rear section of the outer rail onto the square holes on the rear of the
rack. Take care that the proper holes are used so the rails are level. If desired, use screws
(and washers) to secure the rear of the outer rail to the rear of the rack.
12.
Repeat for the other outer rail.
The rails are attached.
Next, insert the server into the rack.
How to install the system into your rack
This section provides information on installing a chassis into a rack unit with the rails provided.
There are a variety of rack units on the market, so the assembly procedure may differ slightly.
Also refer to the installation instructions for your rack unit.
