regulations and keep it out of children’s reach.
The equipment might be contaminated during storage and transport. Before use, please
verify whether the packages are intact. In case of any damage, do not apply it to patients.
2.2 Power On/Off
Press the Power On/Off button to power on the device. Press and hold Power On/Off button for 2
seconds to power off the device.
2.3 Initial Settings
The first time Portable ECG monitor is powered on, you can follow the steps below to set up your
monitor.
3.
Using the device
3.1 Prior to Use
Warnings
Use only cables, and accessories specified in this manual.
The device has no alarms and will not sound if the measurement reading is too low or too
high.
Before using ECG
Before using ECG Recorder function, pay attention to the following points in order to obtain precise
measurements.
The ECG electrode must be positioned directly against the skin.
If your skin or hands are dry, moisten them using a damp cloth before taking the measurement.
If the ECG electrodes are dirty, remove the dirt using a soft cloth or cotton bud dampened with
disinfectant alcohol.
During the measurement, do not touch your body with the hand with which you are taking the
measurement.
Please note that there must be no skin contact between your right and left hand. Otherwise, the
measurement cannot be taken correctly.
Stay still during the measurement, do not speak and hold the device still. Movements of any kind will
affect the measurements.
If possible, take the measurement when sitting and not when standing.
Warnings
When connecting external electrodes and/or patient cables, make sure that the connectors never
come into contact with other conductive parts, or with earth. In particular, make sure that all of the
Step
User Interface
Action
1
Tap the “+” or “-” button to change the
date, month and year.
Then tap
.
2
Tap the “+” or “-” button to change the
time.
Then tap
.
3
The Main Screen shows when you finish
the steps as above.
