When choosing a third-party USB charging device, select one that complies with IEC 60950.
The service life of the battery will depend on the conditions of use, but on average it will
support 500 charging / discharging cycles.
6.3 Cleaning
Warnings
Have the device repaired by authorized service centers only, otherwise its warranty is
invalid.
Clean the device per week, carefully swabbing the device surface with a soft cloth or cotton
swab with rubbing 70% alcohol.
Do not pour alcohol directly on or into the device.
6.4 Trouble Shooting
6.5 Disposal
Batteries and electronic instruments must be disposed of in accordance with the locally
applicable regulations, not with domestic’s waste.
7.
Accessories
Warnings
Use accessories specified in this chapter. Using other accessories may cause damage to the
device or not meet the claimed specifications.
Problem
Possible Cause
Solution
The device does not
turn on.
1. The battery may be low.
2. The device might be
damaged
1. Charge the battery and try
again.
2. Please contact with your local
distributor.
Low battery indicator is
blinking
The battery is low.
Charge the battery and try again.
The ECG waveform
amplitude is small
The lead you choose is not
suitable for you.
Change another lead and try
again.
ECG waveform drifts or
disappears and “Touch
electrodes properly”
displayed.
1. The pressure exerted on
the electrode is not stable
or too much.
2. Hand or body may be
moving.
1. Hold the device stably and
gently.
2. Try to keep perfectly still and
test again.
“System Error”
occurred.
Software or hardware
failure.
Restart the device and measure
again. If the error persists, mark
down the error number and
contact with your local distributor.
Part Number
Description
540-00192-00
ECG cable with 2 lead wires, snap
540-00194-00
Charging / Data Cable
560-01701-00
Carry Case
