9
measurement. The countdown bar moves from left to right.
5. When the bar is fully filled, the device will analysis your data, and then show
the measurement result.
Measuring with Cable (Optional)
1.
Connect the external SpO
2
sensor to the multi-functional connector.
2.
Put your index finger or middle finger into the external SpO
2
sensor. Make
sure the cable is positioned along the top of the hand, and the finger nail is
in the position as shown below.
Finger nail position
3.
If the device is power off, press the Home button. Tap the <
Pulse Oximeter
>
icon.
4.
The display will then show your PLETH waveform, SpO
2
and pulse rate.
The device will monitor your ECG continuously, however no data will be saved
until you press the
button
5.
Press the
button to start collecting your SpO
2
data. The countdown bar moves
from left to right.
6.
When the bar is fully filled, the device will analysis your data, and then show
the measurement result.
