14
•
Do not drop the instrument or treat it roughly in any way. Avoid strong vibrations.
•
Never open the product! Otherwise the manufacturer calibration becomes invalid!
7.2 Cleaning
The product can be repeatedly used. Please clean before reuse as follow:
•
Clean the product with a soft, dry cloth with 70% alcohol.
•
Do not use petrol, thinners or similar solvent.
•
Clean the cuff carefully with cloth soaked 70% alcohol.
•
The cuff must not be washed.
•
Clean on the product and the arm cuff, and then let it air dry.
7.3 Disposal
Batteries and electronic instruments must be disposed of in accordance with the locally applicable
regulations, not with domestics waste.
8. FCC Statement
FCC ID: 2ADXK-8621
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
