For customer service call 888.784.2835 (+1.423.402.9010 for outside the United States) or visit us online at viatekproducts.com
Pour le service a la clientele appelez le 888.784.2835 (+1.423.402.9010 a l’extérieur des États-Unis) ou visitez viatekproducts.com
Para servicio al consumidor llame al 888.784.2835 (fuera de Estados Unidos 1.423.402.9010) o visite viatekproducts.com
MADE IN
CHINA
Read Instructions
Before Operating
PATENT
PENDING
DO NOT DISPOSE OF BATTERIES IN FIRE. ALWAYS DISPOSE OF BATTERIES PER LOCAL & FEDERAL GUIDELINES.
© 2017 VIATEK CONSUMER PRODUCTS GROUP, INC. All specifications are subject to change without notice. All rights reserved.
Viatek Consumer Products Group, Inc. 6011 Century Oaks Dr. Chattanooga, TN 37416
Rev:
Model:
MK03 (GF-7CN)
032317
EPA EST NO 81827-HKG-001
SETUP
USING THE LURE RING:
Some insects are attracted to scents more than they are attracted to UV
light, so it is important to utilize the lure ring to get the best results. Simply place a lure such as fruit
juice or sugar water into the lure ring.
SELECTING A LOCATION:
The insect trap lures insects toward it, so it’s best to place the unit
away from the area to be protected. Ideally, place the unit between the source of insects (such as a
lawn, wooded area, or pond) and activity areas (such as a deck or patio).
PLACEMENT:
The unit can be placed on a flat surface or hung up using the hanging ring. Always
use a safety cable when hanging, and only hang from places that can support at least 9 lb (4 kg). Be
sure to place in a location out of reach of children.
OPERATION:
Plug the unit in and press the power switch. The UV light and the internal fan will turn
on. As insects are attracted by the UV light and lure, the insect trap’s internal fan pulls them into the
collection chamber where they dehydrate and die.
NOTE: Be sure to keep the plug dry. During outdoor use, plug into an outlet with a code-approved “while in use”
electrical outlet cover.
Maintenance & Storage
Always unplug the unit for maintenance and storage.
Insects will accumulate in the collection chamber over time. To empty, twist the collection chamber
counterclockwise to detach it from the unit. After disposing of the contents, you may wipe the inside
of the chamber clean with a damp cloth. Be sure the chamber is completely dry before reattaching
it to the unit. Reattach the chamber to the bottom of the unit and twist clockwise until it snaps into
place. The chamber may need to be cleaned as often as once a week.
Do not submerge unit in liquid to clean. Use a damp cloth with or without detergent to wipe the
outside of the unit clean. Dry thoroughly with a soft cloth.
The lure ring can be removed and hand washed. This part may be submerged in water once it is
separated from the unit. Dry thoroughly with a soft cloth.
Store indoors when not in operation. Do not leave exposed to extreme weather such as high winds
or heavy rain.
4008295
POLARIZED ATTACHMENT PLUG
To Reduce the Risk of Electric Shock, this appliance has a polarized plug
(one blade is wider than the other). This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the proper outlet. Do not
change the plug in any way. Keep the plug away from rain or any liquid.
SERVICING OF DOUBLE-INSULATED APPLIANCES
In a double-insulated appliance, two systems of insulation are provided
instead of grounding. No grounding means is provided on a double-
insulated appliance, nor should a means for grounding be added to the
appliance. Servicing of a double-insulated appliance requires extreme care
and knowledge of the system, and should be done only by qualified service
personnel. Replacement parts for a double-insulated appliance must be
identical to those parts in the appliance. A double-insulated appliance is
marked with the words “DOUBLE INSULATION” or “DOUBLE INSULATED.”
The symbol may also be marked on the appliance.
