ASSEMBLY
1. Place each side of the lure ring around the insect
trap so that the open sides are facing upward (fig. 1).
2. Slide the lure ring joints together (fig. 2 & 3).
3. Twist the ring around until it fits into place and
resists twisting. This will happen when two of the leg
sockets catch on the small tabs on either side of the
ring (fig. 4).
4. If using as a standing model, insert the tops of the
legs into the leg sockets (fig. 5).
HANGING RING
POWER CORD
COLLECTION CHAMBER
4 LEG SOCKETS
UV LIGHT
LURE RING
DISASSEMBLED
4 LEGS
PARTS DIAGRAM
TOPS
POWER SWITCH
Fig. 1
Fig. 2
Fig. 4
Fig. 5
Fig. 3
