background image

                                                                           

 

 

1

1

 

General Introduction  

1.1

 

Overview  

This series megapixel analog HD camera conforms to the HDCVI standard. It supports video 
signal high-speed long distance transmission without any delay. It can be controlled by the 
DVR conforming to the HDCVI.  
  

1.2

 

Features  

z

  High-performance image sensor, megapixel definition. 

z

  HDCVI analog port, support 75-3 coaxial transmission without any loss. 720P resolution 

supports over 500m and 1080P supports as long as 300m.  

z

  High speed, long distance real-time transmission. 

z

  Support HD video/audio, 485 control signal coaxial transmission.  

z

  Support OSD (on-screen display), suitable for user self-defined setup. 

z

  Support IO alarm, RS-485 control.  

z

  Support privacy mask, image digital zoom.  

z

  Support DC12V/AC24V power supplying.  

z

  Support 3D noise reduction(denoise),excellent performance in low illumination 

environment.  

z

  IP66 compliance.  

z

  Support ICR switch to realize surveillance both in the daytime and at night.  

z

  Support IR function. (For IR series product only.) 

 

1.3

 

Functions  

HDCVI Specification  

HDCVI

High Definition Composite Video Interface

 is an over-coaxial –cable analog HD 

video transmission standard. The technology renders two HD video formats: 1920H 
(1920*1080) &1280H (1280*720) by progressive scanning.  

 

OSD 

User-friendly on-screen display for you to select the different functions. 

 

RS-485 

Can connect to peripheral device via 485 serial port. Support various control protocols to 
realize rear-end device activation.  

 

ICR 

The IR cut removal is to filter the IR light in the daytime and then auto switch to the general 
fitter at night. This function allows the camera to output the high sensitivity and clear video. 
 

1.4

 

Specifications 

Please refer to the following sheet for specification. 

Summary of Contents for HAC-HDB3100P/N2812AI























Reviews: