7
3
Installation
Important
z
Before you complete the installation and setup, do not remove the electrostatic
attraction film on the transparent enclosure. Otherwise it may result in injury.
z
After remove electrostatic attraction film, do not touch dome enclosure in case it
may leave stain.
z
The dome camera mainly uses the in-ceiling installation. Before the installation,
please make sure the installation surface can sustain at least 3X weight of the
bracket and the camera.
3.1
Device Installation Introduction
Please refer to Figure 3-1 and Figure 3-2 for device installation space information. You can
use screws (diameter is less than
4.5mm
) to secure the device. You can see there are
installation position map and installation screws in the accessories bag for you to install the
device conveniently.
Figure 3-1
Figure 3-2
