17
5.4.5 Burner and fuel feeder mounted on the boiler
1.
Insert the internal metal plate of the fireplace (2) into the opening in the section approx. 2 cm behind its
front edge.
2.
Mount the ash-pan door (5) on the boiler by means of two nuts M8 and two washers 8,4.
3.
Insert the burner bowl (6) into the holder of the burner bowl (7).
4.
Insert the elbow (1) into the burner.
5.
Mount the fuel feeder in 45 degrees gradient.
6.
The neck of the elbow and the feeder must be in such a
position that after inserting the transport hose its blockage
with pellets cannot occur.
7.
Then interconnect the neck of the feeder with the neck of the
elbow and secure both ends by means of hose clamps.
8.
Demount the burner cover and insert the seven-pole
connector for connection of the burner to the connector
counterpart positioned on the burner.
9.
Mount the burner cover.
10. Connect 3-pin connector with the fuel feeder in the back
panel of the controller with the symbol
.
Fig. no. 13
Fig. no. 14
Burner and fuel feeder mounted on the boiler
1. Elbow
2. Internal metal plate of
the fireplace
3. Burner neck
4. Burner cover
5. Ash-pan door
6. Burner bowl
7. Holder of the burner
bowl
