10
Fuel placing:
•
dry fuel (up to the 12%
moisture) must be used in
order
to
guarantee
the
correct combustion in the
boiler. The pellets should be
stored in their original packing
from
the
manufacturer
(e.g. PET sacks) at a dry place.
•
it is impossible to store fuel
behind the boiler or unload it
next to the boiler in a distance
smaller than 400 mm
•
the manufacturer recommends
that min. 1000 distance is kept
between the boiler and fuel or
the fuel is placed in a room
different from that where the
boiler is installed
Fig. no. 5
Boilers positioning in the boiler room
A permanent air supply for combustion and ventilation must be guaranteed in the room where
the boiler is installed (the air consumption of Woodpell 5 sect. boiler amounts to approx. 80 m
3
.h
-1
,
the air consumption of Woodpell 7 sect. boiler amounts to approx. 160 m
3
.h
-1
).
The connection of heating system piping must be carried out by a person authorised according to the valid
regulations.
.
CAUTION:
When connecting the boiler to the heating system there must be installed a inlet and
outlet cocks in the lowest point and as near as possible to the boiler (at the return
water flange).
5.3
Delivery and accessories
Woodpell boiler is delivered according to the order; the complete boiler drum without the ash door and burner
is placed on the pallet and in the side of it there is attached the wrapped boiler shell. The accessories are in a
box. Then on the pallet there is placed a box with ash-pan door and burner, control box with regulator, fuel
feeder and internal metal plate of the fireplace.
The boiler is wrapped in shipping package and it must not be tipped during the transport. It is only allowed to
tilt it aside in order to remove the packing from the boiler drum.
Standard accessories to boiler:
•
boiler on the pallet
•
ash door
•
connection accessories for the ash-pan door assembly
- nut M8
2 pcs
- washer 8,4
2 pcs
•
burner incl. cover
•
material for burner assembly
- internal metal plate of the fireplace
1 pc
- fuel feeder
1 pc
- elbow
1 pc
- transport hose with reinforcing spiral
1 pc
- hose clip ESK 58-75 W12
2 pcs
•
control box with regulator PUMA incl. the sensors and cables
•
connection accessories for the control box assembly
- screw M5 x 12
2 pcs
- serrated lock washer 5,3
2 pcs
•
shells in the carton incl. ash pan
