VIA EPIA-P910 User Manual
19
3.2.
Backlight Power Jumper
The VIA EPIA-P910 has a jumper that controls the input voltage delivered to the LVDS inverter connector.
The jumper is labeled as “JM2”. The jumper settings are shown below.
Figure 20: Backlight power jumper diagram
Setting
Pin 1
Pin 2
Pin 3
+12V (default)
Short
Short
Open
+5V
Open
Short
Short
Table 18: Backlight power jumper settings
3.3.
LVDS Panel Power Jumper
The VIA EPIA-P910 has one jumper that control the voltage delivered to the LVDS panel connector. The
jumper is labeled as “JM3”. The jumper settings are shown below.
Figure 21: LVDS panel power jumper diagram
Setting
Pin 1
Pin 2
Pin 3
+3.3V (default)
Open
Short
Short
+5V
Short
Short
Open
Table 19: LVDS panel power jumper settings