VIA EPIA-P910 User Manual
15
2.2.6.
System/CPU Fan Connector
The System/CPU fan connector onboard runs on +12V and maintain system/CPU cooling. The fan provides
variable fan speeds controlled by the BIOS. The System/CPU fan connector is labeled as “FAN1”. The
pinouts of the System/CPU fan connector are shown below.
Figure 14: System/CPU fan connector diagram
Pin
Signal
1
FANIN1
2
+12V FAN
3
GND
Table 13: System/CPU fan connector pinouts
2.2.7.
DC-in Power Connector
The VIA EPIA-P910 has an onboard DC-in 2-pin power connector to connect the DC-in power cable. The
DC-in power connector is labeled as “PWR1”. The pinouts of the DC-in power connector are shown
below.
Figure 15: DC-in power connector diagram
Pin
Signal
1
+12V
2
GND
Table 14: DC-in power connector pinouts
