EPIA-M860 User Manual
50
6.5.6.4.
Wake-Up Key
The Wake-Up Key feature can only be set when Resume on PS/2 KBC is set to “S3” or “S3/S4/S5”. Otherwise, this feature
will be not selectable. This feature has two options.
Any Key
The Any Key option enables any key on the keyboard to trigger the Wake-Up event.
Specific Key
The Specific Key option unlocks the Wake-Up Password feature.
6.5.6.5.
Wake-Up Password
The Wake-Up Password feature can only be set when the Wake-Up Key feature is set to “Specific Key”. This feature
enables the user to specify a key sequence that must be entered in order to wake up the system.
The key sequence can consist of up to 6 alphanumeric characters and some special characters. Function keys and
modifier keys (such as Ctrl, Alt, Del, etc.) cannot be used.
6.5.6.6.
Resume on PS/2 Mouse
Resume on PS/2 Mouse wakes up a system that has been put into suspend or standby mode. When this feature is
enabled, any PS/2 mouse activity that is detected will cause the system to wake up. This feature has three options.
S3
The S3 option enables any PS/2 mouse activity to be detected if the system is in S3 power saving mode.
S3/S4/S5
The S3/S4/S5 option enables any PS/2 mouse activity to be detected if the system is in S3/S4/S5 power saving mode.
Disabled
The Disabled option disables the detection of all PS/2 mouse activity.
6.5.6.7.
Resume on Software RTC Alarm
Resume on Software RTC Alarm should only be used if the FliteDeck
®
1
S5 resume function will be used on the system.
When Resume on Software RTC Alarm is enabled, Resume on RTC Alarm will be disabled.
Note:
FliteDeck is a system management suite developed by VIA Technologies, Incorporated.
6.5.6.8.
Resume on RTC Alarm
Resume on RTC Alarm can only be used if Resume on Software RTC Alarm is not enabled. This feature enables the BIOS
to automatically power on the system at a scheduled time. When enabled, the RTC Alarm Date and System Time
features will be unlocked.
6.5.6.9.
RTC Alarm Date (Days)
The RTC Alarm Date feature is visible only when Resume on RTC Alarm is enabled. This feature enables the user to
specify a specific date each month or daily recurrence. Use the + and - keys on the number pad to change the value of
the RTC Alarm Date.
Every Day
The Every Day option triggers the RTC Alarm daily.
1 – 31
When a specific numeric date is selected, the RTC Alarm will be triggered on that day of the month.
