5
Caution
General
• Do not use the motor and driver beyond their specifications, or injury or damage to
equipment may result.
• Do not touch the motor or driver’s heat sink during operation or immediately after
stopping. The surfaces are hot and may cause a burn.
Transportation
• Do not hold the motor output shaft or motor lead wire. This may cause injury.
Installation
• Keep the area around the motor and driver free of combustible materials in order to
prevent fire or a burn.
• To prevent the risk of damage to equipment, leave nothing around the motor and driver
that would obstruct ventilation.
• Provide a cover over the rotating parts (output shaft) of the motor to prevent injury.
Operation
• Use a motor and driver only in the specified combination. An incorrect combination may
cause a fire.
• To avoid injury, remain alert during operation so that the motor can be stopped
immediately in an emergency.
• Before supplying power to the driver, turn all input signals to the driver to “OFF.”
Otherwise, the motor may start suddenly and cause injury or damage to equipment.
• Before moving the motor directly with the hands (as in the case of manual positioning),
confirm that the driver A.W.OFF (All Windings Off) input is “ON” to prevent injury.
• When an abnormality is noted, stop the operation immediately, or fire or injury may
occur.
Disposal
• When disposing of the motor or driver, treat them as industrial waste.
