VEXILAR FL-18 Owner'S Manual Download

Page: 74 / 86

TRANSDUCER OPTIONS

Transom Mount High Speed Styles (25' Cable)

• TB0030 - 9° Cone Angle
• TB0044 - 19° Cone Angle
• TB0084 - 12° Cone Angle

• TB0045 - Dual 9/19° Cone Angle*

Transom Style Conversion Kits

• TK-144 - 19° for the FL-8

and FL-18

• TK-244 - 19° for the FL-12, FL-20, FL-22 & FLX Series
• TK-184 - 12° for the FL-8

and FL-18

• TK-284 - 12° for the FL-12, FL-20, FL-22 & FLX Series
• TK-130 - 9° for the FL-8

and FL-18

• TK-230 - 9° for the FL-12, FL-20, FL-22 & FLX Series

• TK-145 - Dual 9/19° for the FL-8

and FL-18*

• TK-245 - Dual 9/19° for the FL-12, FL-20, FL-22 & FLX Series*

• BK0044 - Suction cup mount for all of the above High Speed Transducers.

Puck Styles (25' Cable)

• TB0023 - 19° Cone Angle
• TB0087 - 12° Cone Angle

• TB0027 - 9° Cone Angle

• TB0032 - Dual 9/19° Cone Angle*

Puck Style Conversion Kits (25' Cable)

• TK-123 - 19° for the FL-8

and FL-18

• TK-223 - 19° for the FL-12, FL-20 FL-22, & FLX Series
• TK-187 - 12° for the FL-8

and FL-18

• TK-287 - 12° for the FL-12, FL-20, FL-22 & FLX Series
• TK-127 - 9° for the FL-8

and FL-18

• TK-227 - 9° for the FL-12, FL-20, FL-22 & FLX Series

• TK-132 - Dual 9/19° for the FL-8

and FL-18*

• TK-232 - Dual 9/19° for the FL-12, FL-20, FL-22 & FLX Series*

• BK0023 - Suction Cup Mount for the TB0023 19° Puck Transducer
• BK0027 - Suction Cup Mount for the Pro-View and DB Transducer

Universal Transducer Kit (30' Cable)

• TK-100 - 19° Transducer Kit for all FL/FLX series flashers.

Includes options for transom, trolling motor and suction cup mounting.

Ice-Ducers (7' Cable)

• TB0050 - 19° Cone Angle
• TB0080 - 12° Cone Angle
• TB0051 - Pro-View 9°

• TBB-100 - Broad Band for FLX-30

Transom style transducers include the

mounting bracket and have 25 feet

of cable. Conversion kits include the

transducer, flasher mounting bracket,

power cable and installation hardware.

Puck style transducers include a trolling motor

mounting tie and A.C.E. adhesive for in-hull

mounting. All have 25 feet of cable. Conversion

kits include the transducer, flasher mounting

bracket, power cable, and installation hardware.

*Dual beam transducers include a beam switch assembly.

Transducer Exchange Policy

If you purchase the wrong transducer for your intended fishing application, you can exchange the new

transducer for a different one with Vexilar. Only pay the retail cost difference of the transducer style,

plus shipping. Please call for more information.

Summary of Contents for FL-18























































































Search results

Summary of Contents for FL-18

Reviews:

Related manuals for FL-18

Brands by name

Popular brands

VEXILAR FL-18, Owner'S Manual

Search results

Summary of Contents for FL-18

Reviews:

Related manuals for FL-18

Brands by name

Popular brands