VEXILAR FL-18 Owner'S Manual Download Page 49

Page: 49 / 86

Mode and Gain Controls

The Mode and Gain Controls work in conjunction with each other. First select the Mode, then
push in on the Gain Control to cycle through the Mode’s options. The display will show the
current setting.

Mode Settings and Options

Zoom (Z):

This mode controls the Auto Zoom settings. Cycle through the available zoom

ranges: 6', 12', 18' and OFF.

Frequency (F):

This mode controls the FLX-30’s Broad Band setting. Cycle through these

frequencies: 160, 180, 200, 225, 250, 275 & 300 kHz (see next page).

Power (P):

Choose the output power in this mode. Cycle through Low, Medium and High.

Range (R

): Choose a ranging method in this mode. Auto Range depths will be adjusted

automatically from these settings: 10, 15, 20, 25, 30, 40, 50, 60, 80, 100, 120, 160, 200, 240 and
300 feet. Cycle to one of the manual range groups:

Shallow Range Group: 10, 15, 20, 30 and 40 feet

Middle Range Group: 50, 75, 100, 125 and 150 feet

Deep Range Group: 175, 200, 225, 250 and 300 feet

Color (C):

Choose the color palette you like best while in this mode (see page 56). Night

Mode is also activated from this mode (see page 53).

FLX-30

™

OPERATION

Summary of Contents for FL-18























































































Search results

Summary of Contents for FL-18

Reviews:

Related manuals for FL-18

Brands by name

Popular brands

VEXILAR FL-18, Owner'S Manual

Search results

Summary of Contents for FL-18

Reviews:

Related manuals for FL-18

Brands by name

Popular brands