2
CONTENTS
INTRODUCTION
The Concept
The whole idea of the Edge
3
is the
ability to see the same thing using two
different types of sonar. The Edge
3
is
actually two depth sounders built into
one unit. Each sounder has it’s own
advantages. The goal is to give you
the best of both worlds so that you can
know more about what’s underneath your boat.
TRUE Dual Frequency / Dual Beam Operation
The Edge
3
is not your run-of-the-mill dual frequency depth
sounder. You truly have two separate sounders with two
separate transducers with separate controls.
107 kHz Depth Sounder
The first of the two sounders uses a 107 kHz frequency with
a 38° cone angle. This low frequency gives you a lot of power
throughout the very wide cone. Low frequencies have an
edge over higher frequencies by being able to cover a lot of
area and reach into deep water much more efficiently. Lower
frequencies also tend to filter out targets of very small size.
400 kHz Depth Sounder
The other half of the Edge
3
uses a 400 kHz frequency offering
a 10° cone angle. This high frequency gives a very tight cone
for amazing precision. Higher frequencies have an advan-
tage over lower frequencies for these reasons. Higher fre-
quencies will also see small targets the low frequencies miss.
Introduction
2
Specs & Features
3
Installation
4
Connecting to Power
4
Transom Transducer Installation
4
Electric Trolling Motor Transducer Installation
5
In-Hull Transducer Installation
6
Temperature Probe Installation
6
Unit Operation
7
Understanding the Display
7
Control Panel Keys
9
Menu Functions
10
Accessories & Replacement Parts
15
Trouble Shooting
16
Service
16
Vexilar reserves the right to modify the features
and specification described within this manual
at any time and without notice.
