090430.01
85
Système de gestion réservoir, ultrasonore
FRANÇAIS
N.B. il n‘existe pas de différence entre
les deux raccordements !
Utiliser les splitters et câbles intermédiai-
res fournis si vous devez raccorder plus
de 2 capteurs.
3.2.5 Instruments secondaires
Raccorder un instrument secondaire di-
rectement à l‘instrument principal ou au
réseau de capteurs ; voir les chapitres 6
et 7.
Utiliser à cette fin un câble Patch*).
*) Câble Patch : Un câble de réseau UTP
Cat.5 doté aux deux extrémités d‘une
fiche RJ45.
Pas de câble « croisé » !
Le câble Patch est disponible dans les lon-
gueurs suivantes :
- 3 mètres :
Vetus, code d‘art. : SENSOR03
- 5 mètres :
Vetus, code d‘art. : SENSOR05
- 10 mètres :
Vetus, code d‘art. : SENSOR10
Ces câbles sont fournis avec un (1) bloc
de connecteurs.
3.2.6 Contrôle de l‘installation
Après les raccordements, vérifier le bon
fonctionnement de tous les connecteurs.
• Allumer l‘instrument, voir 2.1 « Acti
-
ver ».
L‘instrument à cadran affiche mainte-
nant le contenu de 2 réservoirs.
• Appuyer 1 x sur la touche
.
L‘instrument à cadran doit maintenant
afficher le nom de chaque réservoir rac-
cordé.
Configuration menu
Tank
Vetus
Display settings
Exit
Vetus
• Procéder comme suit pour revenir à
l‘écran normal :
Appuyer successivement sur :
,
et
.
• Régler la langue souhaitée, voir 2.4.1 «
Réglage de la langue ».