070204.03
11
vetus®
Portholes PL, PM, PW, PX, PZ
Marque el hueco a serrar, con la ayuda del bastidor de la portilla; para dimensiones principales,
verse pág. 14, 15, 16, 17, 18.
Haga el hueco en la estructura, serrándolo en caso de poliéster, aluminio o madera- o cortándolo
con soplete - en caso de acero-.
Desbarbe el hueco y corte los bordes.
Estas portillas van provistas de un perfil autosujeción; NO hace falta taladrar agujeros de fijación
en la pared del barco.
Aplique una oruga de pegamento para conseguir un buen cierre, verse dibujo 1, página 19.
Coloque la portilla en el hueco.
Tornillos de fijación:
Use tornillos M4, conforme a DIN965 (ISO7046) of DIN966 (ISO7047). Elija un largo de tornillo
dependientemente del espesor de la pared; verse la tabla al lado del dibujo 1.
D = alcance de sujeción, L = largo de tornillo.
Introduzca los tornillos y apriételos bien.
4
Operación
Para abrir:
Aflojar los fijadores girándolos a la izquierda, inclinarlos para que no obstruyan en paso y abrir
la ventana. La bisagra de sujeción mantendrá la ventana abierta en el ángulo deseado.
Para cerrar:
Empuje la ventana hasta cerrarla, incline los fijadores y gírelos hasta cerrar.
5
Mantenimiento
Limpie a intervalos regulares los
perfiles de aluminio
anodizados o los perfiles con revestimiento
de polvo; 2 a 4 veces al año, dependientemente del grado de suciedad.
Sólo use detergentes neutrales, no abrasivos. NO use substancias alcálicas, ácidas y/o abrasivas.
Proteja
las gomas de estanqueidad
con polvos de talco.
Reajuste de las bisagras:
Reajuste las bisagras cuando la tapa no permanezca abierta.
A I Portillos:
Abra completamente la ventana y gire los tornillos todo lo necesario, verse di-
bujo 2, página 19.
A III Portillos: Retire las cubiertas de plástico de los tornillos y apriételos (2 por bisagra) todo
lo necesario, verse dibujo 3, página 19.
6
Datos técnicos
Bastidor, contraborde
: Aluminio (AIMgSiO.5)
Ventana
: PMMA 10 mm
ESPAÑOL