manualshive.com logo in svg

Vetus M4.15 SOLAS, Operation Manual, Page: 65 / 80

Share
Download
Vetus M4.15 SOLAS Operation Manual Download Page 65

63

Engine lubricating Oil

Only use a recognised brand of oil for lubricating the engine.

Lube oils are differentiated according to their performance and 
quality class. In common use are specifications named after 
API (American Petroleum Institute) and CCMC (Committee of 
Common Market Automobile Constructors).
Approved API Oils 

: 

CD, CE and CF4

Approved ACEA Oils 

: 

A3/B3, A3/B4

As the viscosity of lube oil is dependent on temperature, the oil 
vicosity (SAE grade) should be selected according to the ambient 
temperature when the the engine is started.
To avoid oil changes dictated by the seasons we advise one of 
the following multi-grade oils.

- SAE 10W40 for temperatures of -25°C up to +30°C
 

(-13°F up to +86°F)

- SAE 15W40 for temperatures of -20°C up to +35°C
 

(-4°F up to +95°F)

For example:   

Vetus Marine Diesel Engine Oil 15W-40

 

 

Shell Nautilus Premium Inboard Oil 15W-40

Gearbox lubricating Oil

Only use a recognised brand of oil for lubricating the gearbox.

Technodrive:

model TMC40 

: 0.20 litres, Engine oil SAE 20/30

model TMC40 M / P : 0.20 litres, ATF*) (0.35 UK pt, 0.4 US pt)
model TMC60 

: 0.80 litres, Engine oil SAE 20/30

model TMC60 E / P : 0.80 litres, ATF*)  (1.4 UK pt, 1.7 US pt)
model TM345 A / H : 1.6 litres, Engine oil SAE 20W-40-CD
  

(2.8 UK pt, 3.4 US pt)

ZF Hurth

:

model ZF10M 

: 0.35 litres, ATF*) (0.6 UK pt, 0.74 US pt)

model 12 

: 1.1 litres, ATF*) (1.9 UK pt, 2.3 US pt)

model 15MA 

: 0.56 litres, ATF*) (1 UK pt, 1.2 US pt)

model 15V 

: 1.0 litres, ATF*) (1.8 UK pt, 2.1 US pt)

Other brands of gearboxes:

See supplied owners manual for oil type and quantities.

*) ATF  

: AutomaticTransmission Fluid;

 

  Transmissie olie type A, Suffix A.

For example 

: Vetus Transmission Oil

 

  Shell Donax T6

 

  Gulf ATF Synth

Operating media

lubricating oil

Summary of Contents for M4.15 SOLAS

















































































Reviews:

No comments