manualshive.com logo in svg

Vetter Smartfork, Operating Instructions Manual

Share
Download
Vetter Smartfork Operating Instructions Manual Download Page 37

5 

Operation of the VETTER SmartFork

®

WARNING!
Danger to life from obstructed view!

People and objects under or in front of the raised load are not detected
depending on the features of the VETTER Smart

Fork

®

 or depending on

the position of the sensors. If people or objects in the danger zone are

not detected, there is a risk of serious accidents.

–

The VETTER Smart

Fork

®

 is only an assistance system. Always

adhere to the general requirements for safety and due diligence.

–

Ensure that there are no people or objects in the danger zone of the

industrial truck.

–

If the situation in the transport area is not visible, get out and carry

out a visual inspection or refer to someone who can guide and assist

you.

Personnel:

n

Driver of industrial trucks

Protective equipment:

n

Protective work clothing

n

Industrial helmet

n

Protective gloves

n

Safety shoes

5.1 

VETTER SmartFork

®

 Camera

Fig. 20: VETTER SmartFork

®

 Camera

General

requirement

for safety

  Operation of the VETTER SmartFork

®

VETTER SmartFork® Camera

V1.08/2019

SmartFork

®

- The intelligent SensorFork

37

Summary of Contents for Smartfork































































Reviews:

No comments

Brands by name

Popular brands

Load more brands