manualshive.com logo in svg

Vetter Smartfork, Operating Instructions Manual

Share
Download
Vetter Smartfork Operating Instructions Manual Download Page 32

4 

Initial assembly of the VETTER SmartFork

®

4.1 

Installing the VETTER SmartFork

®

 on the fork carriage

NOTICE!

Initial assembly of the VETTER Smart

Fork

®

 may only be carried out by a

service specialist.

Personnel:

n

Service specialist

Protective equipment:

n

Industrial helmet

n

Protective work clothing

n

Protective gloves

n

Safety shoes

Special tool:

n

Lifting device

Carry out installation of the VETTER Smart

Fork

®

 on the fork carriage in the following

order:

1.

Prepare the lifting device for large loads, e.g. indoor crane and lifting straps. The

work is to be carried out by 2 people.

2.

Move the fork carriage to the vertical position and move it to a height that allows for
safe and comfortable installation of the VETTER Smart

Fork

®

.

3.

Remove the locking screw on the assembly side of the fork carriage.

Fig. 17: Opening the locking device

4.

Open the locking device of the VETTER Smart

Fork

®

 by lifting the lever (fig. 18).

 Initial assembly of the VETTER SmartFork

®

Installing the VETTER SmartFork® on the fork carriage

V1.08/2019

SmartFork

®

- The intelligent SensorFork

32

Summary of Contents for Smartfork































































Reviews:

No comments

Brands by name

Popular brands

Load more brands