manualshive.com logo in svg

Vetter SmartFork FrontCam ATEX, Operating Instructions Manual

Share
Download
Vetter SmartFork FrontCam ATEX Operating Instructions Manual Download Page 22

W: Week of manufacture

J: Year of manufacture

F: Production order number

Number of the EC type examination certificate
The number of the type examination certificate is located on a type plate

sticker on the side of the fork back, below the hard stamping.

Fork arms for use in Ex zones must be equipped with a corresponding Ex

zone classification and may only be used together with the approved des-

ignated carrier vehicle in the Ex zones approved for the fork arm and car-

rier vehicle.

The ATEX type plate provides information about the intended deployment environment for
the Smart

Fork

®

 upon delivery and is located on the fork back underneath the hard

stamping.

The ATEX type plate contains specifications for the equipment group, equipment cate-

gory, hazard type (type of potentially explosive atmosphere) and maximum temperature

value (For further details, see 

Ä

 Further information on page 6

).

Fig. 3: ATEX type plate (example)

Only use the Smart

Fork

®

 in the Ex zone specified here. Do not put the Smart

Fork

®

 into

operation without an Ex zone marking.

ATEX type

plate

 Safety

Safety markings

SmartFork

®

 FrontCam ATEX for use in the Ex zone - BVS 20 ATEX E 108 X

22

EN

Summary of Contents for SmartFork FrontCam ATEX

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands