Page 15/39
6.
Vetter High Pressure Leak Sealing System
6.1
Description
The high pressure leak sealing system consists of one or three sealing
hoses, depending on the version. This is intended for sealing T-pieces,
pipe bends or problematic connection supports.
Additional sealing plates made of different materials (NBR, EPDM, glass
fibre reinforced plastic) produce a higher resistance.
6.2
Safety instructions
Observe the pertinent regulations for work safety. Danger of
explosion! If there are inflammable liquid or gas leaks it is im-
perative that sparks be avoided by fixtures and fittings.
6.3
Ground connection
9
The inflation valve as well as couplings and joints on the sealing ho-
ses and on the inflation hose are made of stainless steel.
9
The sealing hoses are conductive and equipped with a grounding
device on both sides.
9
Fix the ground cable onto the grounding device attached to the
sealing hose.
9
Secure the ground cable hand-tight using the wing nut.
9
Before use, check to see whether the high pressure leak sealing sys-
tem is resistant against hazardous materials.
9
Wear specified protective clothing necessary for operation
