HEART RATE MEMORY
STORAGE & RECALL
At the end of your ride or workout, or
at any point during a race or training
ride, this feature freezes heart rate
data for review in a 4 screen sequence.
To activate Heart Rate Memory
Storage and Recall, start from the
HR/% screen mode and press and hold
Button #1 for 2 seconds. Computer will
enter the HR Memory Storage and
Recall mode and display the "Position
#1" screen which shows: A) The time
you spent above the Target Zone
(upper line), B) The upper limit of your
Target Zone (lower line), and C) Your
Average Heart Rate during the time
spent above your Target Zone (lower
left screen segment). The Target Zone
up arrow ( ) appears on this screen
together with the letters "TZ".
Press Button #2 to advance to the
"Position #2" screen. This screen
displays the time you spent IN your
Target Zone (upper line) and your
Average Heart Rate during this time.
The letters "IN" appear on the lower
line, along with both Target Zone
arrows ( ) and the letters "TZ".
Press Button #2 to advance to the
"Position #3" screen. This screen
displays A) The time you spent below
your Target Zone (upper line), B) The
lower limit of your Target Zone (lower
2
2
2
2
1
