VETRON 5064, Service Manual

Page: 29 / 95

27
02/2021
VETRON 5064 Welding Machine
04. COMMISSIONING & WELDING
03. ACCESS RIGHTS
One dongle for identification purposes is included in the scope of delivery of the basis module.
DONGLE 1 = ACCESS RIGHTS, LEVEL 1 (= ADMINISTRATOR) :
»
Assignment of access rights
»
Access to all machine parameters
» Program generation
» Program selection
» Light
DONGLE 2 (OPTIONAL) = ACCESS RIGHTS, LEVEL 2
(= OPERATOR)
:
» Program selection
» Light
» Wheel change
The administrator has access to all functions and can assign access rights using the respective PC program.
The “ VETRON OPERATOR MANAGEMENT ” program is stored on the administrator dongle and
functions as follows:
01. Insert DONGLE 1 (Administrator) into the USB slot of the computer.
02. Call up the “ VETRON OPERATOR MANAGEMENT ” program.
03. Insert further DONGLE into the computer.
04. Enter first name, last name, employee number, as well as the access rights,
and click on SAVE USER DATA .
05. Select a SAVING LOCATION (Dongle) for the authentication file.
To set the access permission, see chapter 05.07. machine parameters 817.