background image

- 08 -

- 09 -

User's Guide of Digital Mini Multimeters DT-16/DT-18 

7. Measurement positive input terminal (red probe)
8. Measurement positive input terminal (black probe)

6  Key fUnCTions anD aUTo power off

6.1 seleCT Button

The key is the resistance and capacitance measurement, buzz off 

and diode test function switching key, accompanied by beep sound 

when the switch prompt. (For DT16, is no capacitor switching). 
In sleeping mode, press this key to wake the meter and the 

automatically power-off function will be cancelled. (Only for DT-18).

6.2 relaTiVe Button

When press this button, the meter will display the current value 

as a reference value, after that, the readings of measurement will 

automatically subtracting this reference value. Press this button 

again; the meter will exit the relative value measurement into 

the normal measurement state; frequency / duty cycle measurement 

has no the relative value function.

6.3 DaTa HolD Button

Press this button and the display value is locked and remained. 

Press this button again, the locked state is released, and the meter 

enters the normal measuring mode. For DT16, in sleeping mode, 

press this button to wake the instrument and the automatically 

power-off function will be cancelled.

6.4 Hz/Duty measurement

In the ACV/DCV file, press this button and convert into Hz/Duty

measurement (Press Hz/Duty button back and forth to measure the 

frequency or duty cycle); After measuring the Hz/DUTY return 

the DCV or ACV, the measurement range of the instrument is 

Summary of Contents for DT-16




















Reviews: