user manual
www.vetek.com
2
II. kEYBOARD AND CHARACTER PROMPT
1. kEYBOARD
ON/
zERO
Turns the scale on and zero
TARE
Tare key
OFF
Power Off
SET
0~9
Set/Fig. key. Set parameterand input Fig.
2. CHARACTER PROMPT
dc x.xx:
Mean the voltage of battery is x.xx V.
------:
Show this as the weight over 100%FS+9e, with the ding sounding, this means over load,
reduce the weight.
-AdC-:
As the A/D change overflowing, display shows this with the ding sounding
bATLo:
The voltage is lower. You can use a short while and charge immediately.
c _End:
Recharge is end.
Err-0:
Overload zero of loadcell. Please re-adjust or change loadcell.
II. OPERATION GUIDE
1.Preparation
Adjust the base foot, watch the level, make the pan in horizontal.
2. Turn on or turn off
2.1 Turn on
Press the [ON/zERO] key, the ding sound, it displays version No. and the battery voltage level and
9,8,7···1,0, the “zERO” lamp lighting. Now the scale is in a working state.
2.2 Turn off Long- press [OFF] key.
2.3 Auto-off
After 10 minutes in zeroing, auto-off.
2.4 Low voltage auto-off
When the voltage lower than 5.6V, then power-off.
