VESTEL AOB-6004, User Manual

Page: 8 / 33

- This appliance is not connected to a
combustion products evacuation device. It shall
be installed and connected in accordance with
current installation regulations. Particular
attention shall be given to the relevant
requirements regarding ventilation.
- If after 15 s the burner has not lit, stop
operating the device and open the compartment
door and/or wait at least 1 min before attempting
a further ignition of the burner.
- These instructions are only valid if the country
symbol appears on the appliance. If the symbol
does not appear on the appliance, it is
necessary to refer to the technical instructions
which will provide the necessary instructions
concerning modification of the appliance to the
conditions of use of the country.
- All possible security measures have been
taken to ensure your safety. Since the glass may
break, you should be careful while cleaning to
avoid scratching. Avoid hitting or knocking on the
glass with accessories.
- Ensure that the supply cord is not wedged
during the installation. If the supply cord is
damaged, it must be replaced by the
manufacturer, its service agent or similarly
qualified persons in order to prevent a hazard.
5