12
3. INSTALLATION AND PREPARATIONS FOR USE
•
Place the hob in the cut out.
Then mark the location of the
hob on the cooktop with a
marker.
•
Take out the hob. Place the
gasket on the line you merked.
Be sure the line centres the
gasket.
Be sure the junctions overlap at
the corners and no gap is left
along the sealing material.
•
Place the hob carefully on the worktop, be sure the edges of the cooktop centres
the gasket. Fix in positon via the brackets and screws. Adjust the position of the
barackets depending on the thickness of the worktop as indicated in Figure and
tighten the screws starting from the front bottom edge.
•
Carefully trim away the excess gasket from around the appliance.
Summary of Contents for AOB-6004
Page 1: ...AOX 6004 DG AOB 6004 BUILT IN GAS HOB...
Page 33: ......
