VESTEL 55FA9000, Operating Instructions Manual

Page: 81 / 122

English - 79 -
compatible with this TV. The TV supports
FAT32 and NTFS disk formatting.
While formatting USB hard drives which have
more than 1TB (Tera Byte) storage space
you may experience some problems in the
formatting process.
Wait a little while before each plugging and
unplugging as the player may still be reading
files. Failure to do so may cause physical
damage to the USB player and the USB
device itself. Do not pull out your drive while
playing a file.
You can use USB hubs with your TV’s USB
inputs. External power supplied USB hubs are
recommended in such a case.
It is recommended to use the TV’s USB
input(s) directly, if you are going to connect
a USB hard disk.
NOTE : When viewing image files the Media
Browser menu can only display 1000 image files
stored on the connected USB device.
Media Browser Menu
You can play photo, music and movie files
stored on a USB disk by connecting it to your
TV. Connect a USB disk to one of the USB
inputs located on the side of the TV. Pressing
the Menu button while in the Media Browser
mode will access the Picture , Sound and
Settings menu options. Pressing the Menu
button again will exit from this screen. You
can set your Media Browser preferences by
using the Settings menu.
Loop/Shuffle Mode Operation
Start playback with
the Play button and
activate
All files in the list
will be continuously
played in original
order
Start playback with
the OK button and
activate
The same file
will be played
continuously
(repeat)
Start playback with
the Play button
and activate
All files in the list
will be played once
in random order
Start playback with
the Play button
and activate ,
All files in the list
will be continuously
played in the same
random order.
Custom Boot Up Logo
You can personalize your TV and see your
favorite image or photo on the screen each
time your TV boots up. To do this, copy
your favorite image files into a USB disk and
open them from the Media Browser menu.
When you have chosen the desired image,
highlight it and press OK to view it in full
screen. Press OK again to choose the image
as custom logo. A confirmation message will
be displayed. Select Yes and press OK again.
If the image is suitable (*) you will see it on the
screen during the TV’s next boot up.
NOTE : If you perform a First Time Installation
the TV will return to using the default logo, if any.
(*) Images should have an aspect ratio of 16:9 and
they should be in .jpg, .jpeg or .jpe file formats.
Only files with sizes no greater then 300KB are
supported. The image cannot be set as boot
logo, which’s resolution doesn’t appear on the
info banner.
FollowMe TV (if available)
With your mobile device you can stream
the current broadcast from your smart TV
using the FollowMe TV feature. Install the
appropriate Smart Center application to your
mobile device. Start the application.