VESTEL 39FB7100, Operating Instructions Manual

Page: 73 / 115

English - 72 -
Connections
Connector Type Cables Device
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV
PC/YPbPr
Audio
Connection
(side) YPbPr/PC Audio Cable
HDMI
Connection
(back)
S/PDIF
(Optical Out)
Connection
(back)
Side AV
(Audio/Video)
Connection
(side)
AV Cable
HEADPHONE
Headphone
Connection
(side)
YPBPR
YPbPr Video
Connection
(back)
PC to YPbPr Connection Cable
USB
Connection
(side)
CI
Connection
(side)
CAM
module
LAN
Ethernet
Connection
(back)
LAN / Ethernet Cable
NOTE: When connecting
a device via the YPbPr or
Side AV input, you must
use the connection cables to
enable connection. See the
illustrations on the left side.
| You can use YPbPr to VGA
cable to enable YPbPr signal
via VGA input. | You cannot
use VGA and YPbPr at the
same time. | To enable PC/
YPbPr audio, you will need to
use the side audio inputs with
a YPbPr/PC audio cable for
audio connection. | If an
external device is connected
via the SCART socket, the TV
will automatically switch to AV
mode.| When receiving DTV
channels (Mpeg4 H.264) or
while in Media Browser mode,
output will not be available
via the scart socket. | When
using the wall mounting kit
(available from third party in
the market, if not supplied),
we recommend that you plug
all your cables into the back of
the TV before mounting on
the wall. | Insert or remove the
CI module only when the TV is
SWITCHED OFF. You should
refer to the module instruction
manual for details of the
settings. | The/Each USB input
of your TV supports devices
up to 500mA. Connecting
devices that have current value
above 500mA may damage
your TV. | By connecting an
HDMI cable to your TV, you
have to use only a shielded
HDMI cable to guarantee a
sufficient immunity against
parasitic frequency radiation.
If you want to connect a device to the TV, make sure that both the TV and the device are turned off
before making any connection. After the connection is done, you can turn on the units and use them.
SIDE AV