VESTEL 39FB7100, Operating Instructions Manual

Page: 76 / 115

English - 75 -
highlight TKGS Installation and press OK .
Than select Start Update and press OK .
Analogue: If Analogue broadcast search
option is turned on, the TV will search for
analogue broadcasts after other initial settings
are completed.
Additionally you can set a broadcast type as
your favourite one. Priority will be given to
the selected broadcast type during the search
process and the channels of it will be listed on
the top of the Channel List . When finished,
press OK to continue.
You can activate Store Mode option at
this point. This option will configure your
TV’s settings for store environment and
depending on the TV model being used, the
supported features of it may be displayed
on the top of the screen as an info banner.
This option is intended only for store use.
It is recommended to select Home Mode
for home use. This option will be available in
System>Settings>More menu and can be
turned off/on later.
Press
OK button on the remote control to
continue and the Network/Internet Settings
menu will be displayed, if you confirm the
previously displayed message asking whether
you want to do the network settings. Please
refer to Connectivity section to configure
a wired or a wireless connection. After the
settings are completed press OK button to
continue. To skip to the next step without
doing anything select No and press the OK
button when the message is displayed asking
whether you want to do the network settings.
After the initial settings are completed TV will
start to search for available broadcasts of the
selected broadcast types.
After all the available stations are stored,
scan results will be displayed. Press OK to
continue. The Edit Channel List menu will
be displayed next. You can edit the channel
list according to your preferences or press the
Menu button to quit and watch TV.
While the search continues a message may appear, asking
whether you want to sort channels according to the LCN (*) .
Select Yes and press OK to confirm .
(*) LCN is the Logical Channel Number system that organizes
available broadcasts in accordance with a recognizable channel
number sequence (if available).
NOTE: Do not turn off the TV while initializing first time
installation. Note that, some options may not be available
depending on the country selection.
In the TKGS system, channels can be blocked by the service
provider and Audio/Video transmission will not be available
from these channels.
Using SatcoDX Feature
You can perform SatcoDX operations using
the Installation>Satelite Settings menu. In
the SatcoDX menu, there are two options
regarding to the SatcoDx.
You can download or upload SatcoDX data.
In order to perform these functions a USB
device must be connected to the TV.
You can upload current services and related
satellites & transponders in TV, to a USB
device.
Additionally you can download one of the
SatcoDx files stored in USB device, to the TV.
When you select one of these files, all services
and related satellites and transponders in
the selected file will be stored in the TV. If
there are any installed terrestrial, cable and/
or analog services, they will be kept and only
satellite services will be removed.
Afterwards, check your antenna settings and
make changes if necessary. An error message
stating “ No Signal ” may be displayed if the
antenna settings are not configured properly.
Media Playback via USB Input
You can connect 2.5” and 3.5” inch (hdd with external power
supply) external hard disk drives or USB memory stick to your
TV by using the USB inputs of the TV.
IMPORTANT! Back up the files on your
storage devices before connecting them to