Week function Programming the special functions
The following times were preset for this operation mode by the manu-
facturer:
·
Up time
–
0ß8:0ß0
·
Down time –
2ß0:0ß0
Press the programming button (P) once again and repeat the pre-
viously described setting in order to change the up or down times to
the next weekday.
If you want one particular weekday not to have any up or down times,
deactivate the up or down time by changing the corresponding times
until the display indicates the following:
(-ß-:-ß-)
The deactivated time is now set in between 23:59 and 00:00 and no
up or down time will be displayed for the selected weekday. After
approx. 2 minutes the settings will be automatically stored and the
display will indicate the current time again.
- 53 -
G
Programming the special functions Astro function
The Astro function is basically an electronical calendar. Depending on
the stored sunrise and sunset times, the up or down times are auto-
matically corrected under consideration of the geographical location
of your residence. This correction is based on the up or down times
you previously set.
Example:
You have activated the Astro function and previously programmed the
following up and down times according to the instructions on page 46
and page 47:
Up time
–
0ß6:3ß0
(½ an hour before sunrise according to
the diagram on page 56)
Down time –
1ß9:3ß0
(½ an hour before sunset according to
the diagram on page 56)
Given the current calendar week 14.
In this example, the roller shutter does not move up at 6 : 30, as pro-
grammed but moves up at 7
:
00 when the sun rises.
In the evening, it moves down at 19 : 30 at the programmed time.
- 54 -
G
83100811.qxd 11.09.01 12:17 Seite 55
